Compact HumidiCup® S1 Electronic Cigar Humidifier for 40-150 Count Desktop Humidor

HumidiCup S1 is an electronic cigar humidifier designed to automatically maintain the desired humidity level inside a humidor. Comparable to the M1 model, the S1 features a slimmer cartridge profile, making it suitable for desktop humidors up to 3 cubic feet in size with a 150-cigar capacity. The built-in high-accuracy humidity sensor measures the internal humidity of the humidor, and the microprocessor-controlled quiet fan blows moist airflow into the humidor to maintain the set humidity level.

The humidifier is factory-set at 70% humidity, but users can adjust the setting from 40% to 90% to suit their preferences. Additionally, the device allows for a calibration range of -20 to +20, enabling users to fine-tune the readings.

Key Features: - Slim profile (2.3" height) suitable for desktop humidors - Accurate and reliable performance - Fog-free operation - Audio alerts for high/low humidity levels

Frequently Asked Questions:

1. Can the humidifier be used with moisturizing liquids like Propylene Glycol? Distilled water is recommended, as our testing has shown that Propylene Glycol can cause an irreversible 20% drift in humidity.

2. Why does the fan stop working? The fan stops when the measured humidity reaches or exceeds the set value, and it resumes operation when the humidity drops below the set value.

3. How to install the humidifier? Fill the cartridge with clean water until the sponge is fully saturated, then pour out any excess water. Align the control unit with the cartridge and press it into place until it clicks.

4. How often should water be added for a tabletop humidor? Typically, once a month, but the frequency may vary depending on the humidor size, sealing, and environmental humidity.

5. Can the humidifier be used with a battery? Yes, it can be used with a 5V external battery, but most cellphone power banks with low-current shut-down functions may turn off when the fan stops.

6. Why does the humidifier sometimes beep? The beeping alerts you to high or low humidity levels. The humidifier operates normally, but will beep every 10 seconds if the readings are more than 10% higher or lower than the set value for more than 30 minutes, to remind you to check the status.

7. Can the humidor be sealed with the power cord? Yes, the thin ribbon cable can be used to pass through the seam of the lid while maintaining the air-tightness.

8. How to position the humidifier(s) in a humidor? Ensure the vents are not blocked, and place the humidifier with the LED facing upward, at least 1 inch away from the cigar stacks or humidor walls. For cabinet applications, position the humidifier at the center of the top shelf, and a second one on the middle shelf.

9. How to verify the hygrometer's accuracy? Remove the cartridge and place the white control unit (hygrometer) alongside another hygrometer you trust, then compare the displayed humidity values when they stabilize.

10. How to know when the humidifier needs refilling? If the readings drop significantly compared to previous values, check if the sponge in the cartridge is dry. The humidifier will also beep to remind you to check the sponge when the readings are 10% or more lower than the set value for 30 minutes or longer.

Installation Instructions: 1. Fill the cartridge with clean water until the sponge is fully saturated, then remove any excess water and wipe the exterior dry. 2. Align the control unit with the cartridge and press it into place until it clicks. 3. Connect the power cord and ribbon cable, then plug the adapter into a wall outlet. 4. Set the desired humidity value and place the humidifier in a suitable position inside the humidor.

Enjoy effortless cigar humidification with the HumidiCup S1, featuring accurate performance, reliable operation, and convenient alerts to simplify your cigar care routine.

product information: